SFL-PP Series PET Blow Molding Machine
♦ High performance-price ratio ,high stability for multi serve applications
♦ Simplicity to install,use and maintain("plug and blow" concept)
♦ Significant savings due to competitive pricing
♦ High production
1. Linear two servo motors and double hinges replace the original tie bar clamping,which brings simpler structure,smaller size and less weight and make the machine run smoother,reduce shock and improve speed .
2. New design of steel ball torque limiter efficiently protect the related parts of blowing machine and automatically find the position of itself which reduces the difficulty of maintenance so that maintainer could solve fault easier .
♦ Low energy consumption
1. Without enlarging the PET blow molding machine size ,the heating system is consist of stereoscopic and reduce unit energy consumption.
2. With a closed type dust-proof air inlet hood and an independently air filter inlet system on the equipment, is good for compensating the exhausting air so no need collect air from purification work shop thereby saving energy consumption . The exhaust system in the blowing machine adopts the independent control ,which does not affect the environment of the workshop and has a higher degree of cleanliness. It minimizes the external pollution to the blower .
(high efficiency filtration and purification system FFU,fan ,wind pipe are provided by users).
♦ Quality bottle
1. Adopting integrated technology of blowing-welding as one ,the structure is more simple and reliable.
2. Getting rid of particles powerfully at the same time loading performs and welding rings by using a high-performance static eliminator .
1. No functions are duplicated, auxiliary functions are eliminated ,the machine is stripped of complex parts and it boasts a smaller footprint. The oven, transfer and blowing units all have independent drives. This offers the flexibility to adjust blowing time.
2. Time savings and security as the DMK-L is a fast reliable machine using high technology shared with the DMK-R range .
3. Flexibility and choice owing to its wide scope of bottle dimensions and to its quick change system .
4. The advantages of innovative technology such as pitch change during transfer or a cam system to command the mold unit.
New design of Steel ball torque limiter efficiently protect the related parts of blowing machine and automatically find the position of itself which reduces the difficulty of maintenance so that maintainer could slove fault easier.
All servo motors are imported from OMRON Japan, which are controlled by net that keeps them stable and reliable.
Without enlarging the blowing machine size, the heating system is consist of stereoscopic and multilayer heating lamps which improves the machine capacity to 13,000BPH for 250ML bottles and reduce unit energy consumption.
With a closed type dust-proof air inlet hood and an independently air filter inlet system on the equipment, is good for compensating the exhausting air so no need collect air from purification work shop thereby saving energy consumption. The exhaust system in the blowing machine adopts the independent control, which does not affect the environment of the workshop and has a higher degree of cleanliness. It minimizes the external pollution to the blower. (high efficiency filtration and purification system FFU, fan, wind pipe users-owned).
Adopting integrated technology of blowing-welding as one, the structure is more simple and reliable.
Getting rid of particles powerfully at the same time loading preforms and welding rings by using a high-performance static eliminator.
Parts组成 |
Item |
UNIT单位 |
SFL10/PP |
SFL12/PP |
SFL15/PP |
Forming specifications |
Clamping force |
kg |
60000 |
65000 |
65000 |
Mould plate stroke |
mm |
70*2 |
70*2 |
70*2 |
|
Stretching stroke |
mm |
240 |
240 |
220 |
|
Bottom die trip |
mm |
150 |
150 |
150 |
|
Cavity spacing |
mm |
95.25 |
95.25 |
76.2 |
|
Mold cavity |
cavity |
10 |
12 |
15 |
|
Heating spacing |
mm |
50.8 |
50.8 |
50.8 |
|
Container |
Bottle volume |
ml |
100-500 |
100-500 |
100-500 |
Neck diameter |
mm |
18~30 |
18~30 |
18~30 |
|
Neck height |
mm |
10~25 |
10~25 |
10~25 |
|
Support ring max diameter |
mm |
28~38 |
28~38 |
28~38 |
|
Max preform height |
mm |
100 |
100 |
90 |
|
Max bottle diameter |
mm |
86 |
86 |
70 |
|
Max bottle height |
mm |
225 |
225 |
200 |
|
Output |
(300-500)ML |
B.P.H |
8000~11000 |
9000~13000 |
12000~16000 |
Eletrical system |
Heating box number |
units |
14 |
18 |
20 |
Heating lamp mumber |
pcs |
84 |
126 |
140 |
|
Total load power |
kW |
250 |
302 |
295 |
|
Heating power |
kW |
196 |
252 |
280 |
|
Frequency |
Hz |
50/60Hz |
50/60Hz |
50/60Hz |
|
Voltage |
V |
360~400V |
360~400V |
360~400V |
|
Power consumption |
kW.h |
160 |
225 |
225 |
|
Air system |
Operating pressure |
kg/cm2 |
9 |
9 |
9 |
Low pressure consumption |
L/min |
3000 |
4000(有焊环) |
4500 |
|
Blowing pressure |
kg/cm2 |
18~20 |
18~20 |
18~20 |
|
High pressure consumption |
L/min |
3800 |
5800 |
5000 |
|
Chiller water |
Operating pressure |
kg/cm2 |
3 |
3 |
3 |
Temperature range温度范围 |
℃ |
5~15 |
5~15 |
5~15 |
|
消耗量Consumption |
kcal/hr |
32500 |
42000 |
52500 |
|
流量 |
L/min |
200 |
240 |
300 |
|
Cooling water |
操作压力 |
kg/cm2 |
3 |
3 |
3 |
温度范围Temperature range |
℃ |
20-30 |
20-30 |
20-30 |
|
Consumption |
kcal/hr |
32500 |
47250 |
52500 |
|
Flow rate |
L/min |
200 |
270 |
300 |
|
Machine |
Machine dimension |
meter |
12x5x3.85 |
12.96x5.5x3.85 |
10.6x5.6x3.95 |
Machine weight |
kg |
18600 |
20000 |
22000 |



Tincoo(Changxing) Packaging Technology Co.,Ltd..
TINCOO MACHINERY is a professional supplier devoted to the designing & production of big-scaled and multi-layer extrusion molding machine. The company is located on the south shore of Taihu Lake--Huzhou, with total investment of 10 million dollars, covering a total area of 58,000 square meters. Machines from the company are mainly for export, and have been exported to more than 80 countries in Asia, Mid-East, Europe, Africa, Australia, and Latin-America. The marketing network has covered all over the world.
There are 2 general departments in our company: machinery department & mold department. Machinery department focuses on designing and developing various plastic extrusion blows molding machine by learning foreign advanced techniques& administration faith; mold department focuses on mould design and manufacturing of preform mold& extrusion mold&blow mold. According to different character of different plastic material, we have successfully designed different machines, which are suitable for different products: container of PE, PVC, PP, PC, PETG, PS, PAN, PA, PPE, PPO, ABS, POM, TRA, etc(like big tank, collapsible container car plastic hollow part, office equipment,sport facility, toys, mechanical container,5 gallon PC container,tool box, etc). We have an experienced team will design, produce and offer service after service with great team spirit.High quality but reasonable price has been widely approved by our customers from local and abroad.






2, Well-trained & experienced staff are to answer all your inquiries in English and Chinese.
3, Working time: 8:00am ~5:00pm, Monday to Saturday.
4, Your business relationship with us will be confidential to any third party.
5, Good after-sales service offered, please get back to us if you got any questions.
We will do our best to teaching you how to use the machine.welcome to visit our factory!
2. Excellent technical support
3.Best service