DHB-M120 DHB-M280 Blow Molding Machine General Introduction
Ensuring six or seven layers of resin completely melt,blow molding machine using the latest international composite super imposed multilayer flow design.make the flow smooth and has no dead angle,the material and color piece can be changed,the material base of good quality.
The extrusion system of 6 to 7 layers co-extrusion blow moulding machine consists of 6-7 sets of extrusion and composition,machine parts and screws adopt high quality nitride alloy steel, have high surface hardness, long service life and good quality of plasticzing,which is suitable for processing high molecualr weight polyethlene. The pressure sets on the extrusion system can make sure the stability of material base of the continuous co-extruding die.
DHB-M120 DHB-M280 Blow Molding Machine Advantages
1. Machine platen can be moved down & up.
2. Machine platen has been strengthened.
3. All tubes and lines are located in good order.
4. Mold-moving stand is in box shape. It can make movement more stable and avoid distortion.
5. Tie bars are strengthened to make movement more stable
6. Mold-closing and mold-moving cylinder has been equipped with joint bearing. It can help protect mold-closing and mold-moving cylinder.
7. New blow construction. It can blow vertically and even blow from certain angle.
8. Blow construction has connected to exhausting air pipe. It can make product cool down more quickly.
9. Machine is with auto deflashing.
10. Machine can be connected to conveyor to carry the slitter edge to crusher to be reused.
11. Machine can be connected to conveyor to carry out bottle and connects the filling machine directly.
12. Machine can be equipped with robot arm to take out the bottle.
13. Machine can be equipped with circle-type cutter to trimmer the bottle with foil-sealing type.
14. Mold platen has been professionally designed in construction and shape to keep stable.
15. New and safe machine door.
16. Machine is equipped with reduction valve in the mold-moving parts. It can make mold move more quickly and more stably.
17. Machine is equipped with manual adjuster to adjust the position of mold and blow pin. It makes the adjustment more conveniently.
18. Screw stand is of high rigidity.
19. Screw can be adjusted forward and backward, leftward and rightward.
Advanced processing equipment:
1. Introducing advanced technology from Germany, Italy, Japan etc.
2. Involving advanced design and production of super large-scale blow-molding machine and engineering management capability.
3. Holding over 40 items Patent Technologies.
|
SPECIFICATIONS |
UNIT |
DHB-M120 |
||||||
|
EXTRUDER |
|
|||||||
|
NO. |
— |
A |
B |
C |
D |
E |
F |
G |
|
Screw diameter |
mm |
Φ100 |
Φ100 |
Φ70 |
Φ40 |
Φ40 |
Φ50 |
Φ50 |
|
L/D ration |
— |
36 |
30 |
25 |
25 |
25 |
25 |
25 |
|
Screw speed |
r/min |
0-62 |
0-62 |
0-70 |
0-88 |
0-88 |
0-78 |
0-80 |
|
Plastiazing capacity |
kg/h |
255 |
180 |
100 |
13 |
13 |
25 |
30 |
|
Drive power |
kw |
75 |
75 |
30 |
11 |
11 |
15 |
18 |
|
MOULDING UNITE |
|
|||||||
|
Platen dimension(W×H) |
mm |
1600×1500 |
||||||
|
Distance between platens |
mm |
800-2000 |
||||||
|
Max.mold dimension(W×H×T) |
mm |
1600×1900×1000 |
||||||
|
CO-EXTRUDING HEAD |
|
|||||||
|
Layers of melt materrial |
mm |
6 |
||||||
|
Die dimension |
mm |
Φ200-Φ600 |
||||||
|
Heating power |
kw |
68 |
||||||
|
Heating zones |
zone |
15 |
||||||
|
BLOW UNIT |
|
|||||||
|
Extension stroke |
mm |
250 |
||||||
|
Expansion stroke |
mm |
2×320 |
||||||
|
OTHERS |
|
|||||||
|
Capacity of total power |
kw |
480 |
||||||
|
Average energy consumption |
kw |
≈220 |
||||||
|
Discharge of compressed air |
|
120～150m³/h（1.0MPa） |
||||||
|
Cooling water consumption |
|
40～50m³/h（0.3MPa，20c） |
||||||
|
Total weight |
T |
≈68 |
||||||
|
Overall dimension(L×W×H) |
cm |
1450×1100×700 |
||||||
|
WALL THICKNESS SECTION OF |
|
|||||||
|
Inner new materal layer |
|
25%-35% |
||||||
|
Sticking layer |
|
2% |
||||||
|
Blockading layer |
|
3% |
||||||
|
Sticking layer |
|
2% |
||||||
|
Recycling layer |
|
35%-45% |
||||||
|
Outer new matrial layer |
|
15%-20% |
||||||
|
Inner cond.layer |
|
10% |
||||||
TINCOO MACHINERY is a professional supplier devoted to the designing & production of big-scaled and multi-layer extrusion molding machine. The company is located on the south shore of Taihu Lake--Huzhou, with total investment of 10 million dollars, covering a total area of 58,000 square meters. Machines from the company are mainly for export, and have been exported to more than 80 countries in Asia, Mid-East, Europe, Africa, Australia, and Latin-America. The marketing network has covered all over the world.
There are 2 general departments in our company: machinery department & mold department. Machinery department focuses on designing and developing various plastic extrusion blows molding machine by learning foreign advanced techniques& administration faith; mold department focuses on mould design and manufacturing of preform mold& extrusion mold&blow mold. According to different character of different plastic material, we have successfully designed different machines, which are suitable for different products: container of PE, PVC, PP, PC, PETG, PS, PAN, PA, PPE, PPO, ABS, POM, TRA, etc(like big tank, collapsible container car plastic hollow part, office equipment,sport facility, toys, mechanical container,5 gallon PC container,tool box, etc). We have an experienced team will design, produce and offer service after service with great team spirit.High quality but reasonable price has been widely approved by our customers from local and abroad.
Copyright © 2018 Tincoo (Changxing) Packaging Technology Co., Ltd. All rights reserved. WEB DESIGN:Morndesign
